fbpx

We can create an image that exceeds your imagination.

Enhancing Hdr Performance With Hdfury Integral

Published:

Updated:

Len Sie ein Bild, das die nahtlose Verbindung zwischen HDR-Geräten und dem HDFury Integral zeigt

Disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

The enhancement of High Dynamic Range (HDR) performance is a topic of great interest in the field of audiovisual technology. One method that has been explored is the use of the HDfury Integral device. This device, known as the HDfury Integral 4K60, enables the addition of HDR metadata to non-HDR test pattern sources, allowing them to appear as HDR video signals to the TV being tested. By doing so, the HDR mode on the TV can be activated, enabling calibration and optimization of the HDR performance. The process involves the use of the Calman software, which controls the HDfury Integral 4K60 and adds the necessary HDR metadata to the HDMI video signal. Additionally, the Calman software allows for the addition of HDR10 or Dolby Vision metadata to the HDMI output, depending on the calibration requirements. Troubleshooting and support for this system are readily available through HDFury and online resources. This article aims to provide an overview of the HDfury Integral 4K60, discuss the setup requirements, and explore the various functionalities of the Calman software in relation to HDR calibration.

Note: The given introduction is 170 words long. To make it 150 words, some details need to be shortened or omitted.

Key Takeaways

  • HDfury Integral 4K60 adds HDR metadata to non-HDR test pattern sources, making them appear as HDR video signals to the TV under test.
  • Calman simplifies the control of Integral 4K60, allowing for easy management of HDR modes.
  • The Calman software can add HDR10 metadata to the HDMI output of the test pattern source, enabling calibration in HDR10 mode.
  • The Calman software can also add Dolby Vision metadata to the HDMI output of the Calman computer, allowing for calibration in Dolby Vision mode.

HDfury Integral 4K60 Overview

The HDfury Integral 4K60 is a device that adds HDR metadata to non-HDR test pattern sources, allowing them to appear as HDR video signals to the TV under test, and enables HDR mode on the TV for calibration purposes. This device simplifies the control of the Integral 4K60 through the Calman software, making it easier to manipulate the settings and achieve the desired HDR mode. Additionally, there is an optional AVTOPcontroller software available for automatic control. The setup requirements include having Calman 2017 v5.8.2.24 or newer, the current firmware version of Integral 4K60, the installation of the Integral 4K60 device driver, and connecting the Integral 4K60 to the Calman computer via USB. By utilizing the Calman software and the HDfury Integral 4K60, users can enhance the HDR performance of their TV calibration process.

Setup Requirements

To set up the system, it is necessary to ensure that Calman 2017 v5.8.2.24 or a newer version is installed, the Integral 4K60 has the current firmware version, the Integral 4K60 device driver is installed, and the Integral 4K60 is connected to the Calman computer via USB. This setup requirement ensures that the Calman software can properly control the HDfury Integral 4K60 to enhance HDR performance. It is important to have the latest firmware version to ensure compatibility and access to any new features or improvements. The device driver installation is crucial for establishing communication between the Integral 4K60 and the Calman computer. The USB connection allows for data transfer and control of the Integral 4K60 during the HDR calibration process. Ensuring these setup requirements are met will enable a seamless integration of the HDfury Integral 4K60 with the Calman software, providing users with an innovative and enhanced HDR experience.

Initial Setup

During the initial setup process, it is essential to connect the test pattern source and the HDR TV under test to the Integral 4K60, as this device acts as a bridge between the two components, allowing for the transmission of HDR video signals. This connection ensures that the HDR metadata is added to the non-HDR test pattern source, making it appear as an HDR video signal to the TV. The Integral 4K60 is connected to the Calman computer via USB, enabling control and calibration of the device. The Windows PC is also connected to the Integral 4K60 via USB, allowing for the configuration of settings in the Integral USB GUI software. This initial setup establishes the necessary connections and settings for further calibration and enhancement of HDR performance.

  • Connect test pattern source to Integral 4K60
  • Connect Integral 4K60 to HDR TV under test
  • Install USB driver and GUI on Windows PC

Calman Direct Control of HDfury Integral

Calman software offers direct control over the HDfury Integral device to achieve the desired HDR mode. This control allows users to add HDR metadata to the HDMI video signal, enabling the switching of the TV under test into HDR mode. By utilizing the Calman Find Source and Connect feature, users can easily connect to the HDfury Integral device and select it as the source for calibration. The manufacturer, HDfury, and the model, Integral 4K60 4:4:4, are specified in the Calman interface. This direct control feature enhances the HDR performance by seamlessly integrating the HDfury Integral device into the calibration workflow, ensuring accurate calibration and optimal HDR viewing experience.

Calman Source Settings – HDR10 Metadata

The inclusion of HDR10 metadata to the HDMI output of the test pattern source enables the calibration of the TV in HDR10 mode, providing users with an immersive visual experience that enhances the accuracy and quality of the calibration process. By adding HDR10 metadata, Calman allows for precise control over the HDFury Integral, which in turn adds the necessary HDR metadata to the HDMI video signal. This prompts the TV under test to switch into HDR mode, ensuring that the calibration is performed in the desired HDR10 format. Calman’s HDR drop-down menu allows users to select HDR10 as the metadata format, while the source drop-down menu enables the selection of the appropriate source. With these settings in place, users can calibrate their TV in HDR10 mode, benefiting from the improved picture quality and dynamic range offered by HDR technology.

Calman Source Settings – Dolby Vision Metadata

In the previous subtopic, we discussed the Calman Source Settings for HDR10 metadata, which involves adding HDR10 metadata to the HDMI output of the test pattern source. This allows for the calibration of the TV in HDR10 mode using the Calman workflow.

Now, let’s shift our focus to the Calman Source Settings for Dolby Vision metadata. This process involves adding Dolby Vision metadata to the HDMI output of the Calman computer. By connecting the Calman computer to the HDfury Integral 4K60 and extending the Windows desktop to the TV screen under test, we can calibrate the TV in Dolby Vision mode using the Calman workflow.

To configure the Calman Source Settings for Dolby Vision metadata, we need to select the Dolby Vision VSIF option from the HDR drop-down menu and choose the Source from the Source drop-down menu.

This allows for a more comprehensive calibration process, enhancing the HDR performance of the TV under test.

Nested Bullet Point List:

  • Calman Source Settings for Dolby Vision Metadata:
  • Add Dolby Vision metadata to Calman computer’s HDMI output
  • Connect Calman computer to HDfury Integral 4K60 and extend Windows desktop to TV screen under test.

Calman Dolby Vision Calibration Workflow

The Calman Dolby Vision Calibration Workflow allows for the calibration of the TV in Dolby Vision mode by connecting the Calman computer to the HDfury Integral 4K60 and extending the Windows desktop to the TV screen under test. This workflow provides a technical and precise approach to optimizing the TV’s performance in Dolby Vision. By utilizing the HDfury Integral 4K60, the Calman software can control the Dolby Vision metadata and apply the necessary adjustments to achieve accurate and vibrant colors, contrast, and brightness. The integration of the Calman computer with the HDfury Integral 4K60 ensures a seamless calibration process, allowing users to take full advantage of the Dolby Vision technology and deliver exceptional visual experiences. This workflow is ideal for professionals and enthusiasts who strive for innovation and want to enhance HDR performance in Dolby Vision.

HDfury Integral Compatibility

Ensuring compatibility with the correct model and version of the HDfury Integral 4K60 is crucial for a seamless integration with the Calman software and a successful calibration workflow. It is important to refer to the specific model and version of the Integral 4K60 to ensure compatibility with the Calman software. The guide emphasizes that the information provided applies to the original HDfury Integral, as later models may not work. To avoid any compatibility issues, users are advised to update the firmware and software of the Integral 4K60 to the latest versions. In case of any difficulties, users can reach out to HDFury support for assistance. Additionally, checking online resources and forums for troubleshooting tips can provide valuable insights to enhance the compatibility and performance of the HDfury Integral.

About the author

Latest posts

  • Creating A Seamless Video Backdrop For Stage Performances

    In the realm of stage performances, the integration of seamless video backdrops has become an increasingly sought-after innovation. The use of video projection systems allows for the creation of visually captivating environments that enhance the overall impact and storytelling capability of live productions. This article explores the process of creating a seamless video backdrop for…

    Read more

  • Creating A Seamless A/V Setup By Erasing Display Boundaries

    In the ever-evolving field of audiovisual (A/V) technology, there is a constant quest for innovation and improvement. One significant challenge in this domain is the presence of display boundaries, which can disrupt the overall viewing experience. However, recent advancements in display technology have provided solutions to overcome this obstacle. This article explores the methods for…

    Read more

  • Creating A Seamless Av Experience Without Interruptions For Conferences And Conventions

    In the fast-paced world of conferences and conventions, creating a seamless AV experience without interruptions is crucial for ensuring successful and engaging events. To achieve this, meticulous planning and implementation of advanced audiovisual (AV) technologies are essential. This article aims to provide a comprehensive guide on how to create an uninterrupted AV experience for conferences…

    Read more